| The Constitution Multi-Caliber Rated - Take Down Suppressor |
The Constitution is elegant simplicity in design, intuitive of maintain, full auto rated, take
apart, monolithic core, and made entirely of alloy steel. This suppressor was designed
for the person wanting to have a suppressor that could be used on their FN PS90SBR
that could also work on his or her 223 caliber AR15 and then switched over to their 22LR
AR upper without having to buy 2 suppressors due to the lead buildup issues of the
22LR. We have had a large number of requests for suppressors with these features. This
suppressor is intended for use on carbines and not handguns, although it will work fine
on a handgun, there are 22LR suppressors intended for handgun use that are much
lighter.... (Kodiak and Kodiak TL).
It can be dismantled for cleaning with the provided spanner wrench.
The finish is parkerized dark grey for durability.
Specs:
Caliber: 5.7 x 28mm / 5.56 NATO / 22LR
Major Diameter: 1.68"
Minor Diameter: 1.63"
Length Overall: 6.35"
Weight: 24 ounces
Approx DB Reduction: 30
Material: 4140HT Alloy Steel
Finish: Parkerized
Mounting: Thread Mounted 1/2-28TPI
other thread are available.
apart, monolithic core, and made entirely of alloy steel. This suppressor was designed
for the person wanting to have a suppressor that could be used on their FN PS90SBR
that could also work on his or her 223 caliber AR15 and then switched over to their 22LR
AR upper without having to buy 2 suppressors due to the lead buildup issues of the
22LR. We have had a large number of requests for suppressors with these features. This
suppressor is intended for use on carbines and not handguns, although it will work fine
on a handgun, there are 22LR suppressors intended for handgun use that are much
lighter.... (Kodiak and Kodiak TL).
It can be dismantled for cleaning with the provided spanner wrench.
The finish is parkerized dark grey for durability.
Specs:
Caliber: 5.7 x 28mm / 5.56 NATO / 22LR
Major Diameter: 1.68"
Minor Diameter: 1.63"
Length Overall: 6.35"
Weight: 24 ounces
Approx DB Reduction: 30
Material: 4140HT Alloy Steel
Finish: Parkerized
Mounting: Thread Mounted 1/2-28TPI
other thread are available.
 |
 |
MSRP : 545$
| Constitution on a PS90 SBR |
| Constitution on an M16 |
We now make the Constitution with an
additional feature built into the tube wall. It
is a 1/4" recess that is designed for a
single pin spanner wrench. This has been
added to allow the use of two wrenches
should your suppressor become difficult to
dismantle for cleaning. The wrench can be
purchased from McMaster Carr with the
following part number: 5472A4
additional feature built into the tube wall. It
is a 1/4" recess that is designed for a
single pin spanner wrench. This has been
added to allow the use of two wrenches
should your suppressor become difficult to
dismantle for cleaning. The wrench can be
purchased from McMaster Carr with the
following part number: 5472A4