Services from the Shop
| PRICING FOR SERVICE WORK: |
*Barrel Threading:
We only thread the following barrels now based on the rates below:
Remington 700 family and Savage 10 & 110 families
Ruger 10-22 and Remington 597
All others will be threaded based on shop rate due to the amount of time it takes to
setup and indicate the action in the machine.
We no longer thread break action rifles of any kind.
Thread External Threads on a stripped barrel action or stripped barrel rifle: $75
Same as above when combined with an order for a Liberty Suppressor: $65
Threading with Firearm Fully Assembled (we have to take it apart): $120
Same as above when combined with an order for a Liberty Suppressor: $90
Threading and building adapter for center fire pistol to lengthen barrel for Suppressor: $240
Thread Protectors: $25
*Rebuild or Repair Older Suppressors:
22 Suppressors $250
Take Down Tools (Gives you the ability to service your suppressor) $40
All other Calibers: Contact us.
*Trigger Jobs: $100
Jailbreak Service Including Tools (Make your can owner serviceable, available for
SWR Trident 9 - AAC Evo 9 in CAL - HTG cycle 9 - All others must be sent for evaluation)
*Ramp Bolt on 9mm AR15 $55
*Custom Thread Adapters: Only available with purchase of Liberty Suppressor $80
*Glass Bedding: $180-205
*Cut off and Re-crown Barrel Note - This is not part of threading the muzzle. $75
*Flute Heavy Barrel $125
*True Action
$225
Ruger Mark II
Threading, Thread Protector, Relocate Front Site, remove warning label (Package) $125
Taper barrel MK II converted to bull barrel with threads, target sights, and thread protector $225
*Transfers:
Title 1: $20
Title 2: $50
*Engraving:
SBR on the side of the magwell: Or HK Style Vector Receiver $40
Engrave Tube for a form 1 Suppressor: $60
Engrave Tube for a form 1 Titanium Suppressor: $135
Caliber Mark Rifles: (when barrel action is stripped and stock line is marked:) $40
Available for any other type engraving also: Contact us.
Custom Artwork for Engraving if figured by the hour.
*Custom Muzzle Brakes $180
*Custom Flash Hiders $180.
(Quantities larger than six pieces will be more economical) Contact us.
*Bolt Knobs (Uninstalled) $34
*Custom Precision Rifle Building: Contact us.
*Shortening Rifle Barrels for SBR or Building an SBR Contact us.
*ANY OTHER PROJECT YOU CAN THINK OF: Contact us.
We only thread the following barrels now based on the rates below:
Remington 700 family and Savage 10 & 110 families
Ruger 10-22 and Remington 597
All others will be threaded based on shop rate due to the amount of time it takes to
setup and indicate the action in the machine.
We no longer thread break action rifles of any kind.
Thread External Threads on a stripped barrel action or stripped barrel rifle: $75
Same as above when combined with an order for a Liberty Suppressor: $65
Threading with Firearm Fully Assembled (we have to take it apart): $120
Same as above when combined with an order for a Liberty Suppressor: $90
Threading and building adapter for center fire pistol to lengthen barrel for Suppressor: $240
Thread Protectors: $25
*Rebuild or Repair Older Suppressors:
22 Suppressors $250
Take Down Tools (Gives you the ability to service your suppressor) $40
All other Calibers: Contact us.
*Trigger Jobs: $100
Jailbreak Service Including Tools (Make your can owner serviceable, available for
SWR Trident 9 - AAC Evo 9 in CAL - HTG cycle 9 - All others must be sent for evaluation)
*Ramp Bolt on 9mm AR15 $55
*Custom Thread Adapters: Only available with purchase of Liberty Suppressor $80
*Glass Bedding: $180-205
*Cut off and Re-crown Barrel Note - This is not part of threading the muzzle. $75
*Flute Heavy Barrel $125
*True Action
$225
Ruger Mark II
Threading, Thread Protector, Relocate Front Site, remove warning label (Package) $125
Taper barrel MK II converted to bull barrel with threads, target sights, and thread protector $225
*Transfers:
Title 1: $20
Title 2: $50
*Engraving:
SBR on the side of the magwell: Or HK Style Vector Receiver $40
Engrave Tube for a form 1 Suppressor: $60
Engrave Tube for a form 1 Titanium Suppressor: $135
Caliber Mark Rifles: (when barrel action is stripped and stock line is marked:) $40
Available for any other type engraving also: Contact us.
Custom Artwork for Engraving if figured by the hour.
*Custom Muzzle Brakes $180
*Custom Flash Hiders $180.
(Quantities larger than six pieces will be more economical) Contact us.
*Bolt Knobs (Uninstalled) $34
*Custom Precision Rifle Building: Contact us.
*Shortening Rifle Barrels for SBR or Building an SBR Contact us.
*ANY OTHER PROJECT YOU CAN THINK OF: Contact us.
*Shipping not included in pricing. |
 |
 |
Now you
see it.....
<<<<<<<<<
and now
you dont....
>>>>>>>>>
see it.....
<<<<<<<<<
and now
you dont....
>>>>>>>>>
| Barrel threading with invisible thread protectors |
Thanks Teresa!And thanks to Dave for a
great looking job,fast turn over,and
excellent pricing!
- Matt Auer
great looking job,fast turn over,and
excellent pricing!
- Matt Auer
As a team, you have impressed
me with your knowledge, and
have instilled confidence in my
decision to choose your
company and the products you
manufacture.
~Kyle
me with your knowledge, and
have instilled confidence in my
decision to choose your
company and the products you
manufacture.
~Kyle
CUSTOMIZE YOUR SUPPRESSOR!
Engraving $70-$100
Contact Us today for ideas.
Engraving $70-$100
Contact Us today for ideas.
|
|